Low Temperature Thermal Treatment 5005 H34 Aluminum Sheet 0.2-6.35mm Thickness
Description of 5005 H34 aluminum sheet:
Aluminium alloy 5005 is a medium strength alloy with very good resistance to atmospheric corrosion and very good weldability that is highly suitable for decorative anodising. Please note that whilst alloy 5005 is suitable for anodising, streaks can occur, if the finishing you are seeking is critical please specify "specail anodising quality" when you order.
Anodising advantage of 5005 aluminum alloy:
All aluminium alloys can be anodised to improve corrosion resistance, but decorative anodising is only carried out on a few alloys.The most commonly decoratively anodised non-heat-treatable alloy is 5005. It is produced as a special “anodising quality” (AQ) and is most common and usually successful for general purpose quality (non-AQ) to be anodised. This can however result in some visually inconsistent anodising outcomes and in severe cases in “tiger stripe” appearance. It is always recommended that anodising performance be tested by trialling a piece from a batch of sheet. When anodised, film on 5005 is clearer and lighter than on 3003 and gives better color match with 6063 architectural extrusions.
Applications of alloy 5005 aluminum sheet:
1. Buildings – roofing, cladding, corrugated sheet
2. Signage, road signs & name plates
3. Food & chemical equipment
4. Furniture
5. Anodised parts
6. HVAC equipment
7. Packaging
8. Pipe and tube
9. Can bodies
Temper style of 5005 aluminum sheet:
The most common tempers of 5005 aluminum sheet are H34. It is stabilised - a low temperature thermal treatment or heat introduced during manufacture which stabilises the mechanical properties and relieves residual internal stress, plus usually improves ductility
Chemical element of alloy 5005:
| Alloy 5005 | Spec: BS EN 573-3:2009
Alloy 5005 |
| Chemical Element | % Present |
| Manganese (Mn) | 0.0 - 0.20 |
| Iron (Fe) | 0.0 - 0.70 |
| Copper (Cu) | 0.0 - 0.20 |
| Magnesium (Mg) | 0.50 - 1.10 |
| Silicon (Si) | 0.0 - 0.30 |
| Zinc (Zn) | 0.0 - 0.25 |
| Chromium (Cr) | 0.0 - 0.10 |
| Other (Each) | 0.0 - 0.05 |
| Others (Total) | 0.0 - 0.15 |
| Aluminium (Al) | Balance |
Physical property of alloy 5005 aluminum sheet:
| Physical Property | Value |
| Density | 2.70 g/cm³ |
| Melting Point | 655 °C |
| Thermal Expansion | 23.5 x10^-6 /K |
| Modulus of Elasticity | 69.5 GPa |
| Thermal Conductivity | 201 W/m.K |
| Electrical Resistivity | 0.033 x10^-6 Ω .m |
| Electrical Resistivity | 52 % IACS |
Mechanical Property of 5005 aluminum sheet according to BS EN 485-2:2008:
| Aluminium Sheet - 0.2mm to 6.35mm |
| Mechanical Property | Value |
| Tensile Strength | 145 - 185 MPa |
| Proof Stress | 110 Min MPa |
| Hardness Brinell | 47 HB |
Application Pictures:
Product Tags:
|
|
0.2-6.35mm Thickness 5005 H34 Aluminum Sheet Low Temperature Thermal Treatment Images
|
